Description:
Polyforte offers the anti-static floor finish manufactured with alloy cross-linking technique. This premier floor finish is manufactured with acrylic-acid polymer and is combined with coalescent additives, leveling aids and wax emulsions. This fast-drying, wearable floor finish also provides a high-gloss, dust-free finish.
Product Specifications:
Surface resistance: 1x105-1x108Ω
volume resistance: 1x105-1x108Ω
Electrostatic attenuation: <0.3s
Electrification voltage: <70 V
Solid content: 20±0.5%
pH: 8.0-9.0
Specific weight: 1.03 (25℃)
Centrifuge test: 3000rpm, no change after 30 mins
Freezing-thawing test: no change after 3 cyclins
Coverage: 200m2/gal
Shelf life: 1 year minimal under room temperature
Packaging: 1gal/case, 4gal/case, 5gal/case
Anti-static performance has reached the SJ/T11159-98 requirement
Product features:
Ultra stable/ low maintenance
Transparent/Can be applied on surfaces of all colors
Can be easily spread out on uneven surfaces
Fast drying/ Dries out within 30 mins, less waiting
High gloss/Gives a glossier finish after polishing
Dustproof/Requires minimal effort to maintain the cleanliness of the surfaces
Anti-skidding
Can be easily removed
DIRECTIONS FOR USE
Floor preparation:
To trip floor of old finish, first apply striping chemicals onto the floor using a mop and allow it to sit for about 5 minutes until white foam forms. Remove the finish with a floor scrubber. The procedure may be repeated in order to fully remove the old finish. Remove stripping agent from the surface with a water and dust collector. Rinse floor until all residues is removed.
If the floor was not polished, clean the floor with floor cleaning agent and a floor scrubber. Dry the floor with a mop and the finish can be applied.
Polish application: Dampen the mop with PolyforteTMAntistatic Floor Finish and wring out. Apply a thin, even coat of polish to floor using figure-of-eight strokes. Allow the polish to dry and apply a second coat using the same method.
Buffing and Burnishing: Buff floor with white buffing pad to a high shine. Polish after 24 hours to obtain a glossier finish.
Common errors and possible solutions:
|
1.
|
Low gloss
|
humid environment
|
Use a fan to speed up air circulation. Must not blow directly to the floor.
|
|
The second coat was applied before the first coat dried out
|
Must apply the second coat after the first coat dries out
|
|
Stripping agent was not fully washed off
|
Fully remove the stripping agent before applying polish
|
|
Incomplete buffing
|
Buff after 24 hours
|
|
2.
|
Scratches
|
Polish is too thick
|
Redo after stripping
|
|
3.
|
Flaking
|
Room temperature is too low (<5℃)
|
Increase room temperature
|
|
Long term usage of basic detergents
|
Use neutral detergents
|
|
Usage of two types of polishes
|
Use only one type of polish
|
|
Buffing pads or polishing pads are too hard
|
Choose softer pads
|
|
4.
|
Stripes
|
Polish is too thin, mop or floor was not cleaned properly
|
Increase the amount of polish applied; Use clean mops and clean floor thoroughly before applying polish
|
|
5.
|
Fish eye shaped patterns
|
Oil stains on the floor or oil-based protective agent has been applied
|
Clean floor with degreasing agent or stripping chemicals
|
|
6.
|
Heavy foot prints
|
Polish gets sticky due to low temperature and high humidity
|
Buff for a few more times
|
Maintenance and related products
NOTE: The antistatic properties of the floor will be lost if cleaned with water. Cleaning with antistatic dedusting agent P1208 is recommended.
PolyforteTMAntistatic dedusting agent P 1208 is an environmentally friendly dedusting agent with a fresh lemon scent, designed to control static generation and to increase resistance to abrasion. The oil-based solution can effectively clean the floor and prevents dust from accumulating.
General Use Directions:
1. Soak clean mop in the PolyforteTMAntistatic dedusting agent for 12-24 hours, and then wring out.
2. Clean floor with the mop, dust can be removed by gently shaking the mop head.
PolyforteTMStripping Agent is a basic solution which can efficiently remove embedded dirt and old finish to provide a clean surface for reapplying polish. Compatibility test before usage is recommended.
more information ,please visit our webisite: www.polyforte.en.alibaba.com
