Home
Product Catalog
News
Contact Us

Product Catalog 

Anti static floor polish

  • Anti static floor polish
  • Anti static floor polish
  • Anti static floor polish
  • Anti static floor polish
  • Anti static floor polish
Model No.︰P1008
Brand Name︰POLYFORTE
Country of Origin︰China
Unit Price︰US $ 30 / Gallon
Minimum Order︰1 Gallon
Share on:

 Total 7 Related Items 
Prev34567

Product Description

Description:

Polyforte offers the anti-static floor finish manufactured with alloy cross-linking technique. This premier floor finish is manufactured with acrylic-acid polymer and is combined with coalescent additives, leveling aids and wax emulsions. This fast-drying, wearable floor finish also provides a high-gloss, dust-free finish.

 

Product Specifications:

Surface resistance: 1x105-1x108Ω

volume resistance: 1x105-1x108Ω

Electrostatic attenuation: <0.3s

Electrification voltage: <70 V

Solid content: 20±0.5%

pH: 8.0-9.0

Specific weight: 1.03 (25℃)

Centrifuge test: 3000rpm, no change after 30 mins

Freezing-thawing test: no change after 3 cyclins

Coverage: 200m2/gal

Shelf life: 1 year minimal under room temperature

Packaging: 1gal/case, 4gal/case, 5gal/case

Anti-static performance has reached the SJ/T11159-98 requirement

 

Product features:

Ultra stable/ low maintenance

Transparent/Can be applied on surfaces of all colors

Can be easily spread out on uneven surfaces

Fast drying/ Dries out within 30 mins, less waiting

High gloss/Gives a glossier finish after polishing

Dustproof/Requires minimal effort to maintain the cleanliness of the surfaces

Anti-skidding

Can be easily removed

 

DIRECTIONS FOR USE

Floor preparation:

To trip floor of old finish, first apply striping chemicals onto the floor using a mop and allow it to sit for about 5 minutes until white foam forms. Remove the finish with a floor scrubber. The procedure may be repeated in order to fully remove the old finish. Remove stripping agent from the surface with a water and dust collector. Rinse floor until all residues is removed.

If the floor was not polished, clean the floor with floor cleaning agent and a floor scrubber. Dry the floor with a mop and the finish can be applied.

Polish application: Dampen the mop with PolyforteTMAntistatic Floor Finish and wring out. Apply a thin, even coat of polish to floor using figure-of-eight strokes. Allow the polish to dry and apply a second coat using the same method.

Buffing and Burnishing: Buff floor with white buffing pad to a high shine. Polish after 24 hours to obtain a glossier finish.

 

Common errors and possible solutions:

1.

Low gloss

humid environment

Use a fan to speed up air circulation. Must not blow directly to the floor.

The second coat was applied before the first coat dried out

Must apply the second coat after the first coat dries out

Stripping agent was not fully washed off

Fully remove the stripping agent before applying polish

Incomplete buffing

Buff after 24 hours

2.

Scratches

Polish is too thick

Redo after stripping

3.

Flaking

Room temperature is too low (<5℃)

Increase room temperature

Long term usage of basic detergents

Use neutral detergents

Usage of two types of polishes

Use only one type of polish

Buffing pads or polishing pads are too hard

Choose softer pads

4.

Stripes

Polish is too thin, mop or floor was not cleaned properly

Increase the amount of polish applied; Use clean mops and clean floor thoroughly before applying polish

5.

Fish eye shaped patterns

Oil stains on the floor or oil-based protective agent has been applied

Clean floor with  degreasing agent or stripping chemicals

6.

Heavy foot prints

Polish gets sticky due to low temperature and high humidity

Buff for a few more times

 

 


Maintenance and related products
 

 

NOTE: The antistatic properties of the floor will be lost if cleaned with water. Cleaning with antistatic dedusting agent P1208 is recommended.

 

PolyforteTMAntistatic dedusting agent P 1208 is an environmentally friendly dedusting agent with a fresh lemon scent, designed to control static generation and to increase resistance to abrasion. The oil-based solution can effectively clean the floor and prevents dust from accumulating.

 

General Use Directions:

1.     Soak clean mop in the PolyforteTMAntistatic dedusting agent for 12-24 hours, and then wring out.

2.     Clean floor with the mop, dust can be removed by gently shaking the mop head.

 

PolyforteTMStripping Agent is a basic solution which can efficiently remove embedded dirt and old finish to provide a clean surface for reapplying polish. Compatibility test before usage is recommended.

more information ,please visit our webisite: www.polyforte.en.alibaba.com

Payment Terms︰T/T
Product Image






Related Products
Anti static floor wax
Anti static floor wax
CNY ¥ 160
Antiqued marbled effect durable cost-efficient acid stain
Antiqued marbled effect durable cost-efficient acid stain
CNY ¥ 80
Multi-functional effective quick dry Water Based Dyeing
Multi-functional effective quick dry Water Based Dyeing
CNY ¥ 75
Eliminate Fabric contact static Spray
Eliminate Fabric contact static Spray
CNY ¥ 220




Home  |  Product Catalog  |  News  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版

Powered by DIYTrade.com  Build your FREE website !